Aimon PS/XB Elite(V) Setup Software:

The Setup Software is Microsoft Windows compatible. It is used for firmware upgrade, button remap, configuration and setting

adjustments.


To use the Setup Software you will first have to install the driver. To dowload the Aimon driver,  Go To the Driver page.

Aimon PS/XB Elite Setup software has change the way to program your Aimon dongle for different games. Other than the AImon

PS/XB Setup software, it doesn't need to upgrade firmware from game to game. Instead, it only needs to setup the settings for

each game. The firmware upgrade is needed ONLY when fix a bug or add fueatures.

Aimon PS/XB Elite is not compatible with Aimon PS/XB, thus, this Elite software is different than the Aimon PS/XB software.


If you are a Aimon PS/XB user, please use the Aimon PS/XB software which can be found on PS/XB Setup Sotware page.


Download Setup Softwre:


Press the link below to download the latest Setup software and save it to your local hard drive.


>> Aimon PS Elite Setup Software. (2012-09-17)


>> Aimon XB Elite(V) Setup Software.
(2012-09-25)


 Note:
 
Aimon XB Elite(V) Setup Software  is applicable to both Aimon XB Elite and Aimon XB EliteV .


 

Older Aimon XB Elite Setup software:


>> Aimon XB Elite Setup Software(2011-12-27)


Important Note: 

This Aimon XB Elite Setup software is ONLY applicable to Aimon XB Elite V2 or V3. To indentify it, check and find out there is a "V2" or "V3" sticker under the mouse, Wand and dognle bottom.




Using the Setup Software:

Click on the link below to download the "PS/XB Elite Setup software Manual"  for detailed instructions.

>> PDF_adobe_document_01Aimon PS/XB Elite Setup Software Manual in PDF format.


Notes:

All the firmware and factory setting profiles are on tuact.com website, you will need to connect your PC to the

internet for updating firmware and downloading profiles.

The factory profile is the setting sets Tuact tuned for gamer's convenient use. You can download and tweak it,

then creat your own sttings base on it. It can be saved to your Aimon Elite or your local hard drive for re-use

or exchange with other gamers.


If you have any error message, unable to setup or save the settings to your Aimon in the software, please contact our support.

The firmware and software may have bugs, We appreciate any error report, feedback and/or suggestions. Please feel free to

post your message on our forums or email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it .



Software Revision:


1. Ver 2011.11.23 (2011- 11-23):                    The first beta version.     
2. Ver 2012-9-25                                           The current official version.

 


Aimon PS Elite Firmware Revison:

1. Ver 1.1   (2011-11-22)           The first Elite beta version.

2. Ver 1.2   (2011-11-27)           The offical version.

3. Ver 1.3   (2011-12-16)           Fixed the Deadzone adjustment display error: 
                                             The deadzone display now matches the manual instruction. The correct deadzone  spot is where
                                              the cross hair stops moving or starts moving when pressing F.   

4. Ver 1.4   (2012-1-3)              Beta version, has a bug, not recommanded.

5. Ver 1.5   (2012-1-6)              Fixing the issue of unstable key pressiing when remap wand button to mouse.

6. Ver 1.6   (2012-2-2)              Fixed the Y direction snake movment issue, improved the tracking smoothness.
                                             Download and upgrade the 1.6 Setting profile is recommended.

7. Ver 1.7  (2012-10-16)            Added square/circular deadzone option:
                                             Press F+Select to toggle the deadzone type.
                                             Fixed few bugs that causig the unstable issues.

8. Ver 1.8 (2012-10-24)             Added a new mode on PS3:  PC mouse mode on PS3.
                                             Press dongle button for 2 seconds to toggle the mode between controller mode and PC mouse
                                             mode
when playing on PS3 console.


Aimon XB EliteV firmware revision:


1. Ver 1.7 (2012-6-27)              Added online voice and 3rd party controllers support.
                                             Player can talk online and using 3rd part controller.

2. Ver 1.8 (2012-6-27)              added square/circular deadzone selection:
                                             Press F+Select button to toggle the deadzone type.

3. Ver 1.9 (2012-6-27)               Fixed the Cable test function bug.

4. Ver 2.0 (2012-6-27)               Fixed a bug that causing when turn on the ADS lock, the mouse speed is then faster than
                                              setting value.

                                              Fixed a bug that causing when wheel is defined as a key, other key is not astable.
                       
5. Ver 2.1 (2012-11-8)               Added a new mode for PC game play: Controller mode on PC.
                                              Press the dongle button for 2 seconds to toggle the PC mouse mode and PC controller mode.


Aimon XB Elite firmware revision:


1. Ver 1.7 (2012-7-19)               Added Square/circular deadzone option:
                                              Press the F+Select to toggle the deadzone type.

2. Ver 1.8 (2012-10-8)               Fixed a bug that causing when turn on the ADS lock, the mouse speed is then faster than
                                              setting value.

                                              Fixed a bug that causing when wheel is defined as a key, other key is not astable.

3. Ver XBOX (2012-10-31)          A special version for a new mode for PC game play: Controller mode on PC.
                                              Plug-in without press dongel button will enter the 360 Controller mode on PC.
                                              Due to the code speace limit, this firmware version removed theMouse mode for PC.
                                              Player want to use it as PC mouse would
need to re-fresh the firmware back to any normal
                                              version.


When change the deadzone between circular and sqare by pressing F+Select, after release those two buttons, 
the dongle LED will flash once for sqare deadzone and twice for circular deadzone mode.

 


Game setting profile for Firmware v1.0-1.5 download:

 

The following profile download is for player who like to use the previous firmware, it is needed to have the following

settings to get the best performance.

BattleField2 V1.0.psc

BattleField3 V1.0.psc

COD7 V1.0.psc

COD8 V1.0.psc

HomeFront V1.0.psc

KillZone 3 V1.0.psc

MAG V1.0.psc

UnCharted2 V1.0.psc